Site Tools


creator_pro_3d_printer

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
creator_pro_3d_printer [2019/09/06 09:54]
24.158.60.179 [Usage Notes]
creator_pro_3d_printer [2019/11/24 11:11]
136.55.187.214 [Usage Notes]
Line 17: Line 17:
   - create your stl file   - create your stl file
   - open FlashPrint - free to download on your machine; also installed on the laptop that controls the TAZ   - open FlashPrint - free to download on your machine; also installed on the laptop that controls the TAZ
-  - use FlashPrint to slice your file +  - use FlashPrint to slice your file (basically, just load your file and generate supports if you need them) 
-  - click on Print and select your print options+  - click on Print and select your print options ​(be sure to enable supports if you added supports in step 3)
   - save the g-code file to an SD card (the SD card slot is just inside the printer door over the controls)   - save the g-code file to an SD card (the SD card slot is just inside the printer door over the controls)
-  - insert the SD card into the printer and print form the SD card+  - insert the SD card into the printer and print from the SD card
creator_pro_3d_printer.txt · Last modified: 2019/11/24 11:11 by 136.55.187.214