Site Tools


creator_pro_3d_printer

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
creator_pro_3d_printer [2019/05/29 18:15]
99.187.157.162
creator_pro_3d_printer [2019/11/24 11:11] (current)
136.55.187.214 [Usage Notes]
Line 1: Line 1:
-===== Creator Pro 3D Printer =====+===== Creator Pro 3D Printer ​(Zaniac) ​=====
  
 PLEASE NOTE: You may **NOT** use this machine prior to being checked out on it. PLEASE NOTE: You may **NOT** use this machine prior to being checked out on it.
Line 14: Line 14:
 ====Usage Notes==== ====Usage Notes====
  
 +The workflow for this printer is: 
 +  - create your stl file 
 +  - open FlashPrint - free to download on your machine; also installed on the laptop that controls the TAZ 
 +  - use FlashPrint to slice your file (basically, just load your file and generate supports if you need them) 
 +  - click on Print and select your print options (be sure to enable supports if you added supports in step 3) 
 +  - save the g-code file to an SD card (the SD card slot is just inside the printer door over the controls) 
 +  - insert the SD card into the printer and print from the SD card
creator_pro_3d_printer.1559168145.txt.gz · Last modified: 2019/05/29 18:15 by 99.187.157.162