Site Tools


laser_rotary_attachment

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
laser_rotary_attachment [2019/01/03 13:45]
24.158.60.179
laser_rotary_attachment [2019/01/03 13:47]
24.158.60.179
Line 11: Line 11:
 **Working Condition**:​ yes \\ **Working Condition**:​ yes \\
 **Contact**:​ Zak S. \\ **Contact**:​ Zak S. \\
- 
  
 NEVER plug in or unplug the rotary attachment or the y-axis motor when the laser is powered on. NEVER plug in or unplug the rotary attachment or the y-axis motor when the laser is powered on.
 To use the rotary attachment, set the following parameters on the laser by opening LightBurn and going to Edit/​Machine Settings: To use the rotary attachment, set the following parameters on the laser by opening LightBurn and going to Edit/​Machine Settings:
-Under Rotary Parameters, set Enable Rotary to True +  * Under Rotary Parameters, set Enable Rotary to True 
-Under Y Axis Settings, set Enable Homing to False +  ​* ​Under Y Axis Settings, set Enable Homing to False 
-Under Y Axis Settings, set Max Speed to 75 rather than 300 +  ​* ​Under Y Axis Settings, set Max Speed to 75 rather than 300 
-Under Y Axis Settings, set Max Acceleration to 100 rather than 2,000+  ​* ​Under Y Axis Settings, set Max Acceleration to 100 rather than 2,000
  
 Then click on Write. ​ If you just click OK, changes will not be saved. Then click on Write. ​ If you just click OK, changes will not be saved.
laser_rotary_attachment.txt · Last modified: 2019/06/08 15:11 by 24.158.60.179