Site Tools


robert

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
robert [2017/09/06 14:28]
66.190.155.97 created
robert [2017/09/06 14:46] (current)
66.190.155.97
Line 4: Line 4:
  
 The available commands on the keypad are: The available commands on the keypad are:
-- Switch to clock mode +  ​- Switch to clock mode 
-- Switch to Set Clock mode.  The clock then waits for 5 additional keypad presses in the format hhmmx where x= +  - Switch to Set Clock mode.  The clock then waits for 5 additional keypad presses in the format hhmmx where x equal to 0 indicates AM and x greater than 0 indicates PM. 
-    ​indicates AM and x>0 indicates PM +  - Switch to Set Date mode.  The clock then waits for 8 additional keypad presses in the format mmddyyyy. 
-- Switch to Set Date mode.  The clock then waits for 8 additional keypad presses in the format mmddyyyy.  +  - Switch to Vote mode 
-- Switch to Vote mode +  - Reveal voting results as Count 
-- Reveal voting results as Count +  - Reveal voting results as Pass/Fail 
-- Reveal voting results as Pass/Fail +  - Subtract 1 hour from the clock (for DST) 
-- Subtract 1 hour from the clock (for DST) +  - Add 1 hour to the clock (for DST adjust) 
-- Add 1 hour to the clock (for DST adjust) +  - Switch to random display mode
-- Switch to random display mode+
  
-The source code for the clock is in the attached file.  In addition, there are a number of third-party libraries used.  The DS3231 library can be found [[https://​github.com/​jarzebski/​Arduino-DS3231|here]]. ​ The other libraries are standard libraries and most can be installed directly within the Arduino IDE.+The source code for the clock can be found [[https://​drive.google.com/​open?​id=0ByE4uXHeoDYNLVZGaEZMUXdvd28|here]].  In addition, there are a number of third-party libraries used.  The DS3231 library can be found [[https://​github.com/​jarzebski/​Arduino-DS3231|here]]. ​ The other libraries are standard libraries and most can be installed directly within the Arduino IDE.
robert.1504722508.txt.gz · Last modified: 2017/09/06 14:28 by 66.190.155.97