Asheville Makers Wiki

Edit the page and hit Save. See syntax for Wiki syntax. Please edit the page only if you can improve it. If you want to test some things, learn to make your first steps on the playground.

===== Creator Pro 3D Printer (Zaniac) =====

PLEASE NOTE: You may **NOT** use this machine prior to being checked out on it.

**Owner/Loaner**: Asheville Makers \\
**Donated By**: Zaniacs \\
**Serial Number**: N/A \\
**Make/Model**: [[http://www.flashforge.com/creator-pro-3d-printer/|Creator Pro]] \\
**Arrival Date**: May 2019 \\
**Working Condition**: yes \\
**Contact**: ? \\
**Manual**: [[http://www.flashforge.com/wp-content/uploads/2017/08/FlashForge-Creator-Pro-Users-Guide.V.20170812.pdf|Click here]]

====Usage Notes====

The workflow for this printer is:
  - create your stl file
  - open FlashPrint - free to download on your machine; also installed on the laptop that controls the TAZ
  - use FlashPrint to slice your file (basically, just load your file and generate supports if you need them)
  - click on Print and select your print options (be sure to enable supports if you added supports in step 3)
  - save the g-code file to an SD card (the SD card slot is just inside the printer door over the controls)
  - insert the SD card into the printer and print from the SD card

Please fill all the letters into the box to prove you're human. C M᠎ V R C Please keep this field empty:

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported

Asheville Makers Wiki

Site Tools

Page Tools