Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 18.216.188.79
Lock expires at: 2025/04/19 12:22 (13 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Creator Pro 3D Printer (Zaniac) =====

PLEASE NOTE: You may **NOT** use this machine prior to being checked out on it.

**Owner/Loaner**: Asheville Makers \\
**Donated By**: Zaniacs \\
**Serial Number**: N/A \\
**Make/Model**: [[http://www.flashforge.com/creator-pro-3d-printer/|Creator Pro]] \\
**Arrival Date**: May 2019 \\
**Working Condition**: yes \\
**Contact**: ? \\
**Manual**: [[http://www.flashforge.com/wp-content/uploads/2017/08/FlashForge-Creator-Pro-Users-Guide.V.20170812.pdf|Click here]]

====Usage Notes====

The workflow for this printer is:
  - create your stl file
  - open FlashPrint - free to download on your machine; also installed on the laptop that controls the TAZ
  - use FlashPrint to slice your file
  - click on Print and select your print options
  - save the g-code file to an SD card
  - insert the SD card into the printer and print form the SD card

Asheville Makers Wiki

Site Tools

Page locked

Page Tools