This is an old revision of the document!
NEVER plug in or unplug the rotary attachment or the y-axis motor when the laser is powered on. To use the rotary attachment, set the following parameters on the laser by opening LightBurn and going to Edit/Machine Settings: - Under Rotary Parameters, set Enable Rotary to True - Under Y Axis Settings, set Enable Homing to False - Under Y Axis Settings, set Max Speed to 75 rather than 300 - Under Y Axis Settings, set Max Acceleration to 100 rather than 2,000 Then click on Write. If you just click OK, changes will not be saved.