This is an old revision of the document!
===== Laser Rotary Attachment ===== PLEASE NOTE: You may **NOT** use this machine prior to being checked out on it. **Owner/Loaner**: Asheville Makers \\ **Donated By**: N/A \\ **Serial Number**: N/A \\ **Make/Model**: [[https://www.cloudraylaser.com/products/mechanical-parts-rotation-axis-engraving-model-a?variant=45520840968|Cloudray]] \\ **Arrival Date**: December 2018 \\ **Manual**: N/A\\ **Working Condition**: yes \\ **Contact**: Zak S. \\ NEVER plug in or unplug the rotary attachment or the y-axis motor when the laser is powered on. To use the rotary attachment, set the following parameters on the laser by opening LightBurn and going to Edit/Machine Settings: * Under Rotary Parameters, set Enable Rotary to True * Under Y Axis Settings, set Enable Homing to False * Under Y Axis Settings, set Max Speed to 75 rather than 300 * Under Y Axis Settings, set Max Acceleration to 100 rather than 2,000 Then click on Write. If you just click OK, changes will not be saved.
