Site Tools


Hotfix release available: 2018-04-22b "Greebo". upgrade now! [50.2] (what's this?)
Hotfix release available: 2018-04-22a "Greebo". upgrade now! [50.1] (what's this?)
New release available: 2018-04-22 "Greebo". upgrade now! [50] (what's this?)
Hotfix release available: 2017-02-19f "Frusterick Manners". upgrade now! [49.6] (what's this?)
Hotfix release available: 2017-02-19e "Frusterick Manners". upgrade now! [49.5] (what's this?)
Hotfix release available fixing CVE-2017-12979 and CVE-2017-12980: 2017-02-19d "Frusterick Manners". upgrade now! [49.4] (what's this?)
Hotfix release available fixing CVE-2017-12583: 2017-02-19c "Frusterick Manners". upgrade now! [49.3] (what's this?)
Hotfix release available fixing security token and media manager: 2017-02-19b "Frusterick Manners". upgrade now! [49.2] (what's this?)
Hotfix release available fixing install and media manager issues: 2017-02-19a "Frusterick Manners". upgrade now! [49.1] (what's this?)
New release available: 2017-02-19 "Frusterick Manners". upgrade now! [49] (what's this?)
Hotfix release available: 2016-06-26e "Elenor of Tsort". upgrade now! [48.5] (what's this?)
Hotfix release available fixing CVE-2017-12979 and CVE-2017-12980: 2016-06-26d "Elenor of Tsort". upgrade now! [48.4] (what's this?)
Hotfix release available fixing CVE-2017-12583: 2016-06-26c "Elenor of Tsort". upgrade now! [48.3] (what's this?)
Hotfix release available fixing security token: 2016-06-26b "Elenor of Tsort". upgrade now! [48.2] (what's this?)
Hotfix release available fixing authad issues: 2016-06-26a "Elenor of Tsort". upgrade now! [48.1] (what's this?)
New release available: 2016-06-26 "Elenor of Tsort". upgrade now! [48] (what's this?)
laser_rotary_attachment

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
laser_rotary_attachment [2019/01/03 13:45]
24.158.60.179
laser_rotary_attachment [2019/01/03 13:47] (current)
24.158.60.179
Line 11: Line 11:
 **Working Condition**:​ yes \\ **Working Condition**:​ yes \\
 **Contact**:​ Zak S. \\ **Contact**:​ Zak S. \\
- 
  
 NEVER plug in or unplug the rotary attachment or the y-axis motor when the laser is powered on. NEVER plug in or unplug the rotary attachment or the y-axis motor when the laser is powered on.
 To use the rotary attachment, set the following parameters on the laser by opening LightBurn and going to Edit/​Machine Settings: To use the rotary attachment, set the following parameters on the laser by opening LightBurn and going to Edit/​Machine Settings:
-Under Rotary Parameters, set Enable Rotary to True +  * Under Rotary Parameters, set Enable Rotary to True 
-Under Y Axis Settings, set Enable Homing to False +  ​* ​Under Y Axis Settings, set Enable Homing to False 
-Under Y Axis Settings, set Max Speed to 75 rather than 300 +  ​* ​Under Y Axis Settings, set Max Speed to 75 rather than 300 
-Under Y Axis Settings, set Max Acceleration to 100 rather than 2,000+  ​* ​Under Y Axis Settings, set Max Acceleration to 100 rather than 2,000
  
 Then click on Write. ​ If you just click OK, changes will not be saved. Then click on Write. ​ If you just click OK, changes will not be saved.
laser_rotary_attachment.txt · Last modified: 2019/01/03 13:47 by 24.158.60.179