Site Tools


Hotfix release available: 2018-04-22b "Greebo". upgrade now! [50.2] (what's this?)
Hotfix release available: 2018-04-22a "Greebo". upgrade now! [50.1] (what's this?)
New release available: 2018-04-22 "Greebo". upgrade now! [50] (what's this?)
Hotfix release available: 2017-02-19f "Frusterick Manners". upgrade now! [49.6] (what's this?)
Hotfix release available: 2017-02-19e "Frusterick Manners". upgrade now! [49.5] (what's this?)
Hotfix release available fixing CVE-2017-12979 and CVE-2017-12980: 2017-02-19d "Frusterick Manners". upgrade now! [49.4] (what's this?)
Hotfix release available fixing CVE-2017-12583: 2017-02-19c "Frusterick Manners". upgrade now! [49.3] (what's this?)
Hotfix release available fixing security token and media manager: 2017-02-19b "Frusterick Manners". upgrade now! [49.2] (what's this?)
Hotfix release available fixing install and media manager issues: 2017-02-19a "Frusterick Manners". upgrade now! [49.1] (what's this?)
New release available: 2017-02-19 "Frusterick Manners". upgrade now! [49] (what's this?)
Hotfix release available: 2016-06-26e "Elenor of Tsort". upgrade now! [48.5] (what's this?)
Hotfix release available fixing CVE-2017-12979 and CVE-2017-12980: 2016-06-26d "Elenor of Tsort". upgrade now! [48.4] (what's this?)
Hotfix release available fixing CVE-2017-12583: 2016-06-26c "Elenor of Tsort". upgrade now! [48.3] (what's this?)
Hotfix release available fixing security token: 2016-06-26b "Elenor of Tsort". upgrade now! [48.2] (what's this?)
Hotfix release available fixing authad issues: 2016-06-26a "Elenor of Tsort". upgrade now! [48.1] (what's this?)
New release available: 2016-06-26 "Elenor of Tsort". upgrade now! [48] (what's this?)
new_member_general_info

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
new_member_general_info [2019/07/25 09:50]
24.158.60.179
new_member_general_info [2019/07/25 09:51] (current)
24.158.60.179
Line 10: Line 10:
   - **Safety** - Be sure the lights are out and the space is locked if you leaving and there is no one else in the space at that moment. ​ Don't assume someone who left is coming right back.  Also, never leave the outside doors propped open after hours.   - **Safety** - Be sure the lights are out and the space is locked if you leaving and there is no one else in the space at that moment. ​ Don't assume someone who left is coming right back.  Also, never leave the outside doors propped open after hours.
   - **Music** - We have bluetooth speakers hooked up to listen to music while working. ​ The password to attach, if you are asked, is 1234.  Please be respectful about playing music when others are using the space as well.   - **Music** - We have bluetooth speakers hooked up to listen to music while working. ​ The password to attach, if you are asked, is 1234.  Please be respectful about playing music when others are using the space as well.
-  - **Free supplies** - The plastic filament for the TAZ and Zaniac printers is free for members. ​ You may also use any laser scraps that are in the labeled scrap pile (top shelf only!) beneath the table next to the lasers. ​ Other genrela ​office supplies such as tape, paper towels, glues, etc. are also free to members. ​ The resin for the Formlabs printer is NOT free, and the resin is expensive, so **make sure you understand the cost and process before you print!** ​ Members do get a free allowance for resin each month ($5).  Every time you print with the Formlabs printer, make sure your name is in the filename of your print. ​ The printer will keep a log of prints done and the amount of resin used, and we will set up each month with members who use more than $5 of resin in that month.+  - **Free supplies** - The plastic filament for the TAZ and Zaniac printers is free for members. ​ You may also use any laser scraps that are in the labeled scrap pile (top shelf only!) beneath the table next to the lasers. ​ Other general ​office supplies such as tape, paper towels, glues, etc. are also free to members. ​ The resin for the Formlabs printer is NOT free, and the resin is expensive, so **make sure you understand the cost and process before you print!** ​ Members do get a free allowance for resin each month ($5).  Every time you print with the Formlabs printer, make sure your name is in the filename of your print. ​ The printer will keep a log of prints done and the amount of resin used, and we will set up each month with members who use more than $5 of resin in that month.
new_member_general_info.txt ยท Last modified: 2019/07/25 09:51 by 24.158.60.179