Site Tools


Hotfix release available: 2018-04-22b "Greebo". upgrade now! [50.2] (what's this?)
Hotfix release available: 2018-04-22a "Greebo". upgrade now! [50.1] (what's this?)
New release available: 2018-04-22 "Greebo". upgrade now! [50] (what's this?)
Hotfix release available: 2017-02-19f "Frusterick Manners". upgrade now! [49.6] (what's this?)
Hotfix release available: 2017-02-19e "Frusterick Manners". upgrade now! [49.5] (what's this?)
Hotfix release available fixing CVE-2017-12979 and CVE-2017-12980: 2017-02-19d "Frusterick Manners". upgrade now! [49.4] (what's this?)
Hotfix release available fixing CVE-2017-12583: 2017-02-19c "Frusterick Manners". upgrade now! [49.3] (what's this?)
Hotfix release available fixing security token and media manager: 2017-02-19b "Frusterick Manners". upgrade now! [49.2] (what's this?)
Hotfix release available fixing install and media manager issues: 2017-02-19a "Frusterick Manners". upgrade now! [49.1] (what's this?)
New release available: 2017-02-19 "Frusterick Manners". upgrade now! [49] (what's this?)
Hotfix release available: 2016-06-26e "Elenor of Tsort". upgrade now! [48.5] (what's this?)
Hotfix release available fixing CVE-2017-12979 and CVE-2017-12980: 2016-06-26d "Elenor of Tsort". upgrade now! [48.4] (what's this?)
Hotfix release available fixing CVE-2017-12583: 2016-06-26c "Elenor of Tsort". upgrade now! [48.3] (what's this?)
Hotfix release available fixing security token: 2016-06-26b "Elenor of Tsort". upgrade now! [48.2] (what's this?)
Hotfix release available fixing authad issues: 2016-06-26a "Elenor of Tsort". upgrade now! [48.1] (what's this?)
New release available: 2016-06-26 "Elenor of Tsort". upgrade now! [48] (what's this?)
shapeoko_3_cnc_router

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
shapeoko_3_cnc_router [2016/12/28 15:18]
66.190.155.97 [Usage Notes]
shapeoko_3_cnc_router [2017/10/11 10:42] (current)
66.190.155.97 [Usage Notes]
Line 27: Line 27:
   * For post processing, choose carbide3d.cps for the Post Configuration.   * For post processing, choose carbide3d.cps for the Post Configuration.
   * To engrave with a V bit in Fusion 360 (e.g. lettering), you can select a chamfer mill as your bit and then edit the bit to create the appropriate V bit.  For example, you can create a 1/4 inch 90 degree V bit with the following settings: Diameter - 0.25 in; Shaft Diameter - 0.25 in; Taper Angle 45 deg; Tip Diameter - 0.001 in.   * To engrave with a V bit in Fusion 360 (e.g. lettering), you can select a chamfer mill as your bit and then edit the bit to create the appropriate V bit.  For example, you can create a 1/4 inch 90 degree V bit with the following settings: Diameter - 0.25 in; Shaft Diameter - 0.25 in; Taper Angle 45 deg; Tip Diameter - 0.001 in.
-  * For poplar, cutting 5mm depth, a feed rate of 600 mm/sec gave good results. ​ At 800 mm/sec, the CNC would skip teeth on the belts.+  * For poplar, cutting 5mm depth, a feed rate of 600 mm/min gave good results. ​ At 800 mm/min, the CNC would skip teeth on the belts.
shapeoko_3_cnc_router.txt ยท Last modified: 2017/10/11 10:42 by 66.190.155.97