This is an old revision of the document!
===== TAZ 6 3D Pringter ===== PLEASE NOTE: You may **NOT** use this machine prior to being checked out on it. **Owner/Loaner**: Asheville Makers \\ **Donated By**: Robert S. \\ **Serial Number**: N/A \\ **Make/Model**: [[https://www.lulzbot.com/store/printers/lulzbot-taz-6|LulzBot TAZ 6]] \\ **Arrival Date**: June 2016 \\ **Working Condition**: yes \\ **Contact**: Robert S. \\ ====Usage Notes==== * Unordered List ItemThe extruder head may not pull hard enough on filament to allow it to feed properly if the filament is wound too tightly on the spool, such as When starting a brand new spool of filament. Make sure the filament is not wound so tightly that it won't unspool when the printer is printing.